check that video for not hitting the compressor lines (the compressor itself is in the lower back part of this fridge). In order to fit CO2 + 2 kegs I made this shelf. The kegs sit in front of the CO2 tank in those spaces I cut out of the shelf. The shelf just slides right into the slots where the OEM shelf was.edit: I also threw that chunk of 2x4 in there for support - it's not attached or anything. The wood on the bottom is just to make sure I don't crack the plastic floor of the fridge. It's also just jammed in there (no glue or anything).Shed prolly be OK with that. How did you drill through the top of that mini fridge though without hitting the compressor? and how do you fit 2 kegs and co2 in there? lol
beer gadget Idea.
Started by
HerrHiller
, Dec 31 2009 12:58 PM
24 replies to this topic
#21
Posted 02 January 2010 - 10:59 AM
#22
Posted 02 January 2010 - 11:09 AM
Here are some semi-step-by-step photos that show the basic process but I def left some things out.[mod edit - link removed]probably the most key steps I left out are making sure the spot to drill is clear and putting the piece of wood under the plastic top piece to support the tower.This might actually be what I used for directions when I made mine: My linkedit: you don't need to take all of that stuff out of the door to fit 2 kegs and CO2 in there. I just removed some of the snap out shelf parts.
#23
Posted 02 January 2010 - 11:25 AM
Hiler... you can pick up an Oster 5.0 fridge at Worst Purchase for fairly cheap. The coil is in the back, not on top. There are zero concerns with damaging them. The ledge in the back holds the CO-2 tank perferctly. Only interior modification is the light fixture/temp control needs to be moved up about half an inch. No modifications to the door or anyting.
#24
Posted 02 January 2010 - 11:36 AM
well I dont have the fridge infront of me at this moment.. so im tryiong to think in my head guys... ifd this fridge would be big enough for it.. the one I allready have... here is a video of my mini fridge lol.. im sure u all have seen it before.. anyways you guys think itll fit? https://www.youtube.com/watch?v=GvtjeOSJgisHiler... you can pick up an Oster 5.0 fridge at Worst Purchase for fairly cheap. The coil is in the back, not on top. There are zero concerns with damaging them. The ledge in the back holds the CO-2 tank perferctly. Only interior modification is the light fixture/temp control needs to be moved up about half an inch. No modifications to the door or anyting.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users