28 replies to this topic

[johnpreuss]

After seeing Deer's rig I thought hey why not start a thread like they have on the big board. I know there's alot of sweet rigs out there so you should share.  Mine is anything but that but it makes beer.  Here it is:

 

 

[Poptop]

Pay no attention to the fat guy

 

[HVB]

Old picture but the intent is the same.  Freezer is moved and dedicated to hops, new pump has been installed and the old one moved to a spare. Oh and the TV has been upgraded.

httpss://lh5.googleusercontent.com/-kjWLUHVuv2Y/Uk290mfdJ1I/AAAAAAAADic/m8Dj_bv1_TU/s912/20121104_113141-1.jpg

[neddles]

Dont know how to post pictures but thats ok. Just imagine a very large hop bag made of strong tight weave nylon and a stainless kettle. Done.

Edited by ettels4, 03 October 2013 - 12:31 PM.

[MtnBrewer]

[Thirsty]

My coonhound Willie is blocking most of it. The second is an older pic, the HLTs are 5 gallon coolers seen in the first pic, and sit on the top tier.I hope the images copied, I did them from my tablet. Not sure if I did it right.

[realbeerguy]

needs Mtn's address to do a midnight "run"

[djinkc]

Maybe I can get a few pics this weekend.  I don't think I've posted it in action.  Some gravity, some pumped, all old school electric.

[Deerslyr]

Even though my pic inspired the thread... here it is.  Again, what you can't see is the table with the pump and a bit of piping, along with the CFC mounted to it.

 

The concrete masonry blocks was a very cheap solution to a potentially expensive and very vexing problem that I was having in terms of height adjustments.

 

httpss://scontent-b-ord.xx.fbcdn.net/hphotos-prn2/1381835_10201276912143395_1458422148_n.jpg

[Clintama]

[brewman]

[Deerslyr]

You have more faith in plastic than I do. I don't think I personally would feel comfortable with all that weight on top of there.

[brewman]

Steady as a rock.

[positiveContact]

I don't really have any pics on hand but there isn't much too it.  a couple of sq14s, some kettles, a big cooler and me lifting stuff

Edited by TheGuv, 04 October 2013 - 06:55 AM.

[HVB]

I don't really have any pics on hand but there isn't much too it.  a couple of sq14s, some kettles, a big cooler and me lifting stuff

Ugh .. I hurt thinking about that!

[MakeMeHoppy]

I have a 10 gallon round cooler mash tun, a cheap 9 gallon stainless kettle, a smaller kettle for a HLT and an immersion chiller that I use a bottling bucket to gravity feed ice water through. It's so ghetto I never even thought of taking a picture of it.

[Poptop]

Evening chill; IC, pond pump and pool to cool.

 

[al_bob]

I'll try and post a pic this weekend. All ghetto. Igloo mash tun, gravity to a boil kettle, turkey fry burner, IM with a sump pump in another cooler for chilling. Until I get more fermentation chamber solutions/space, I won't be using my sanke kegs. Actually, i'd nee more cornies too.

[al_bob]

Mtn, did you get away without having to install an exhaust fan?

[Clintama]

Nice system, MtnBrewer.