Edited by rcemech, 28 February 2010 - 04:29 PM.
Keg Charger part 2
#1
Posted 28 February 2010 - 04:29 PM
#2
Posted 28 February 2010 - 04:45 PM
#3
Posted 28 February 2010 - 04:51 PM
It goes Pffft, but thats it. Its brand new never been used. Ill take a picture of the keg post and the gas disconnect on it and yall can let me know if it looks right, but first I have to finish collecting wort.Cheers,RichThe ball bearing ring in the qd should snap/pop when fully on the keg post. I'd also be careful with it if the pressure is being trapped in the disconnect. The chargers put out a lot of psi.It might also be possible the cartridge leaked out if it has been in the charger for a couple days the seal it makes isn't always perfect. It should be a noticeable "phht" when you have it connected right.
#4
Posted 28 February 2010 - 05:45 PM
#5
Posted 01 March 2010 - 12:32 PM
so what was the problem?I got it.Cheers,Rich
#6
Posted 01 March 2010 - 04:47 PM
#7
Posted 02 March 2010 - 10:03 AM
I think he knows this. He's just got something coming up where he's taking a keg and needs to be able to push the beer. Just can't recall if he's using the tank to carbonate or if he's priming the keg with sugar.If you plan on using that to carbonate and dispense with I hope you have lots of money.Those CO2 bulbs aren't cheap.You probably would have been better off with a CO2 tank and regulator.
#8
Posted 03 March 2010 - 04:07 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users